PIONEER XPRS 12

The speakers are enclosed in 15 mm birch plywood cabinets to deliver a natural, dynamic sound. Pioneer’s patented AFAST technology drastically reduces standing waves that can produce a muffled response in the low to mid ranges. An acoustic tube in the cabinet absorbs just the standing waves, increasing the low frequency response.
The XPRS12 uses lightweight 12-inch ferrite LF drivers and 1.75-inch titanium diaphragm compression drivers.
Powersoft’s new Class D amp modules produce 2400 W (peak) or 1200 W (continuous) output, similar to that of larger stand-alone speaker amplifiers. The amps are equipped with Power Factor Correction (PFC) to reduce power consumption while ensuring reliability and a steady performance in all environments.
The auto-ranging power supply means you plug in the XPRS Series anywhere in the world – including venues with generators or temporary power supplies – and expect the same high quality sound.

Speaker Type 12 inch full range active speaker
System characteristic Frequency Response(–10 dB) 50 Hz to 20 kHz
Dispersion (H x V) 90° x 60° (rotatable)
Maximum SPL (peak@1m/1w) 135 dB
Crossover Frequency 2.0 kHz
Amplifier Amplifier type Class D
Power Rating 2400 W peak / 1200 W cont. (LF800 W/HF400 W)
Input connectors 2x XLR/TRS Combo (balanced), 2x RCA (unbalanced)
Impedance 10 kΩ
Output connectors 2x Through output XLR (balanced)
1x Mixed output XLR (balanced)
Speaker LF driver 12-inch ferrite LF cone driver
HF driver 1.75-inch titanium diaphragm neodymium compression driver
Enclosure Not bass reflex
Finish Impact-resistant, black semi-matt textured
Handle 2 (on both sides)
Pole socket 35 mm socket (0°/7° multi-angle)
Rigging point 12x M10
Protection Amplifier Protection Thermal limiting, over-temperature muting, output overcurrent
Driver Protection DC offset removal, high frequency stationary loud signals, input voltage limiter (Peak/RMS)
Power unit Protection Primary AC mains overvoltage protection, Primary AC mains