MEDIA SERIES M502

The M 502 has a controlled coverage through its twin 5" and the precise constant directivity horn. The SPL and the level of undistorted sound the M 502 can reach is far above any expectation from such a compact solution.
The M 502 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded with a constant directivity horn.
The LICC crossover design includes an electronic protection on high frequency device.
FEATURES
High Quality 2-way passive loudspeaker
2 x 5.5" woofer, vented
1 x 1" in driver, on 90°x90° CD horn
High Power Handling ‘Low Impedance Compensated Crossover', with electronic protection for the driver
100W AES power handling
Steel Front Grille with robust double mesh polyester clothing
Rotatable RCF front logo
Installation points are available on the rear panel, top and bottom
All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
ACOUSTICAL SPECIFICATIONS
Frequency Response -10 dB:80 Hz ÷ 20000 Hz
Max SPL @ 1m:116 dB
Horizontal coverage angle:90°
Vertical coverage angle:90°
Directivity index; Q:9
System Sensitivity:92 dB
Nominal Impedance:8 Ω
Power Handling:100 W
Peak Power Handling:400 W
Recommended Amplifier:200 W
Protections:Dynamic
Crossover frequencies:2300 Hz
TRANSDUCERS
Compression Driver:1" HFdriver, 1.5" voice coil
Nominal Impedance:8 Ω
Input Power Rating:25 W AES
Sensitivity:106 dB
Woofer:2 x 5.5" Woofer, 1.2" voice coil
Nominal Impedance:16 Ω
Input Power Rating:80 W AES
Sensitivity:88 dB
INPUT SECTION
Input connector:4-pin EUROBLOCK
CABINET
Cabinet Material:MDF 12 mm
Hardware:6 x M6, 2 x M10
Grille:Steel, with a robust double mesh polyester clothing
Colour:Black
PHYSICAL SPECIFICATIONS
Height:470 / 18.50 mm/inch
Width:175 / 6.88 mm/inch
Depth:185 / 7.28 mm/inch
Net Weight:7.5 / 16.5 kg/lbs