RCF P1108-T

RCF P1108-T
100 W RMS

100 W RMS Weatherproof cabinet IP 55 Aluminium grill and stainless steel bracket One 8" high-output LF transducer with 1.5" voice coil One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil 90° x 60° constant directivity horn 2° x 15° enclosure sides for cluster configurations PTC Driver Protection LICC (Low Impedance Compensated Crossover) network 2 metres 4 x 1.5 Input cable Acoustical Specifications Frequency Response -10 dB: 80 Hz ÷ 20 kHz Max SPL @ 1m: 121 dB Horizontal coverage angle: 90° Vertical coverage angle: 60° Directivity index; Q: 11 System Sensitivity: 95 dB Nominal Impedance: 16 Ω Power Handling: 100 W Peak Power Handling: 400 W Recommended Amplifier: 200 W Protections: Dynamic protection on Compression Driver Crossover frequencies: 2200 Hz Transducers Compression Driver: 1" throat, 1.5" coil diaphragm assembly Nominal Impedance: 8 Ω Input Power Rating: 20 W AES Sensitivity: 107 dB Woofer: 8" woofer, 1.5" voice coil Nominal Impedance: 16 Ω Input Power Rating: 100 W AES Sensitivity: 94 dB Input Section Input connector: 4 x 1.5 mm square 2 m Neoprene cable Constant voltage transformer: 70/100 Power Selection: 70V/30W, 15W - 100V/60W, 30W Cabinet Cabinet Material: 8 mm Polyethylene rotomoulded Hardware: 4 x M8 + U-Bracket and Pair of spacers Grille: Custm perforated aluminium grille with open-cell fiber and water repellent woven fabric backing Colour: Grey Physical Specifications Height: 266/10.47 mm/inch Width: 493/19.40 mm/inch Depth: 250/9.84 mm/inch Net Weight: 12,5/27.55 kg/lbs