RCF P2110-T

RCF P2110-T
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.The high-frequency s

The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. The front logo is in aluminium and rotatable.
The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing.The system features a selectable line transformer for 70 - 100 Volt applications. P 2110-T is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).

  • Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
  • Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
  • Stainless steel bracket
  • One 10" high-output LF transducer with 2" voice coil
  • One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil
  • 90° x 40° constant directivity horn
  • Built in passive crossover and selectable line transformer
  • 10° X 20° enclosure sides for array configurations
  • Active Mosfet Compression Driver Protection
  • LICC (Low Impedance Compensated Crossover) network
  • 12 brass suspension points (M8)
Acoustical Specifications
  • Frequency Response -10 dB:95 Hz ? 20 kHz
  • Max SPL @ 1m:118 dB
  • Horizontal coverage angle:90°
  • Vertical coverage angle:40°
  • Directivity index; Q:11
  • System Sensitivity:95 dB
  • Nominal Impedance:16 ?
  • Power Handling:200 W
  • Peak Power Handling:800 W
  • Recommended Amplifier:400
  • Protections:Dinamyc
  • Crossover frequencies:2000 Hz
  • Compression Driver:1.5" HF driver, 1" voice coil
  • Nominal Impedance:8 ?
  • Input Power Rating:25 W AES
  • Sensitivity:106 dB
  • Woofer:10" woofer, 2.5" voice coil
  • Nominal Impedance:16 ?
  • Input Power Rating:180 W AES
  • Sensitivity:95 dB
Input Section
  • Input connector:5m, 4-adriges Neopren Kabel
  • Constant voltage transformer:70/100
  • Power Selection:70V/30W ,15W , 100V/60W, 30W
  • Cabinet Material:Polyethylene rotomoulded
  • Hardware:12 x M8 inserts+ U-brackets and pair of spacers
  • Grille:Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing
  • Colour:Grey
Physical Specifications
  • Height:350 / 13.78 mm/inch
  • Width:350 / 13.78 mm/inch
  • Depth:320 / 12.60 mm/inch
  • Net Weight:13.5 / 29.75 kg/lbs