RCF P3115-T

RCF P3115-T
WEATHERPROOF COAXIAL TWO WAY SPEAKER
The P3115-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.

The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 15” woofer with a 2.5” voice coil. The P3115-T features a selectable line transformer for 70 - 100 Volt applications. P 3115-T meets the requirements of IP 55 code (International Protection Rating).

Features
  • Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
  • Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
  • Stainless steel bracket
  • 15" high-output LF transducer with 2" voice coil
  • RCF Precision Neo 1" Compression Driver with 1.5" voice coil
  • 90° x 60° constant directivity horn
  • 10° X 20° enclosure sides for array configurations
  • Active Mosfet Compression Driver Protection
  • 12 brass suspension points (M10)
  • Line transformer
Acoustical Specifications
  • Frequency Response -10 dB:75 Hz ? 20 kHz
  • Max SPL @ 1m:123 dB
  • Horizontal coverage angle:90°
  • Vertical coverage angle:60°
  • Directivity index; Q:13.3
  • System Sensitivity:98 dB
  • Nominal Impedance:16 ?
  • Power Handling:300 W
  • Peak Power Handling:1200 W
  • Protections:dinamyc
  • Crossover frequencies:1300 Hz
Transducers
  • Compression Driver:1" HF driver, 1.5" voice coil
  • Nominal Impedance:8 ?
  • Input Power Rating:25 W AES
  • Sensitivity:108 dB
  • Woofer:15" woofer, 2.5" voice coil
  • Nominal Impedance:16 ?
  • Input Power Rating:250 W AES
  • Sensitivity:98 dB
Input Section
  • Input connector:4-adriges Neopren Kabel, 5m
  • Constant voltage transformer:70/100 V
  • Power Selection:70V/60W, 30W , 100V/120W, 60W
Cabinet
  • Cabinet Material:Polyethylene rotomoulded
  • Hardware:12 x M10 inserts+ U-brackets and pair of spacers
  • Grille:Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
  • Colour:grey
Physical Specifications
  • Height:463 / 18.22 mm/inch
  • Width:463 / 18.22 mm/inch
  • Depth:433 / 17.04 mm/inch
  • Net Weight:19.4 / 42.76 kg/lbs